Registration (Pairing) - Oricom OBH36T User Manual

2.3 Registration (Pairing)

The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
1. Tap the in the menu bar.
2. Tap , Camera
3. Tap /
unit will begin searching for a camera to pair to.
Note: If a camera is currently paired with the Parent Unit, its camera
location (in dark grey colour) cannot be selected for a new registration.
Press and hold the PAIR button on the underside of the Baby Unit until
4.
the Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
12
/ /
/ / to select the desired Camera number, the parent
/ will appear.
Getting Started