Oricom OBH36T User Manual page 22

• The following setup instructions will appear on the screen, select your Wi-Fi
network and enter "Password" (fig.12).
• Power on your camera and wait for the Red LED flashing on the camera.
Press and hold the PAIR button on the bottom of Camera, you will hear
a voice prompt "Ready for Pairing" then tap Next (fig.13)
fig.12
• Tap Generate QR code on your device and hold the QR code 15 to 30cm in
front of Camera until you hear confirmation message " Scanning Success"
from your device. (fig.14, fig.15)
fig.14
22
fig.13
fig.15
Wi-Fi® Internet Viewing