Registration (Pairing) - Oricom OBH930 User Manual

2.4 Registration (Pairing)

The Baby Unit is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the - (delete) / + (add) /
3. Press the + UP button or - DOWN button to select + (add), and press
the button to confirm.
Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or - DOWN
4.
button to select the desired Camera, and press the
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * beside it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the bottom of the Baby Unit until
the Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
Getting Started
(view) / (scan) menu will pop up.
is highlighted, and
button to start
13