Advertisement
You will need:
2 x Hanging Rail Brakets(H5)
6 x Hinge Block (H10)
8 x Shelf Supports (H8)
2 x 1/2 6G C/S Screw (H9)
FACING
REAR OF
UNIT
When attaching the hinge
block (H10) ensure that it is
positioned as shown above.
1.
Stand unit upright.
2.
Insert shelf supports (H8) into your preferred position inside the robe
and then insert shelf (P7)
3.
Fix 6 hinge blocks (H10) to parts P3, P4, and P5 into the guide holes using
the screws provided on the hinge block, making sure the Hinge Block (H10)
is facing the right way. (see above picture)
4.
Attach Hanging Rail Brackets (H5) into holes provided in P4 & P3 and fix to
unit using 2 x 1/2 6g C/S Screws (H9). Simply place the Hanging rail (H4)
Into brackets.
P3
FACING
FRONT
OF UNIT
STEP 5
P6
P8
P2
Page 8
P7
P7
P4
P5
Advertisement
