Summary of Contents for fantastic furniture Sonoma Clothes Rack 2 Drawer
Page 1
Version 1.0 Sonoma Clothes Rack 2 Drawer fantasticfurniture.com.au...
Page 2
Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasti cfurni ture Warning: Ensure the wall strap is attached to avoid serious injury.
Assembly Checklist Read through the instructions Make sure you have all the required tools. Never use power tools unless instructed. carefully before you begin. Unless instructed, do not fully tighten Identify and lay out all of the components before you begin assembly. screw s until the item is fully assembled.
What You Need to assemble the product Top Panel Top Right Frame (P1) (P5) Hanging Rail (P8) Top Left Frame Other tools you need (P3) Phillips Head screwdriver;Hammer Back Support (P7) DrawerTop Panel (P9) Right Side Panel Box 1: (P12) Top Panel (P1) (P16) Back Panel...
Page 5
(P3) Step 1 You will need (P4) (P3) (H15) (P3) (P4) 4 x Screws 4 x Adustable (H3) Feet (H1) (P4) (P5) Allen Key (H1) (H15) (P5) (P5) (P6) (P6) (H3) (H1) (P6) (H1) (H15) Attach Top & Lower Left Frames (P3&P4) with 2 x Screws (H3) by (H1) tightening with the Allen Key (H15).
Page 6
Step 3 You will need (P7) 1 x Screw 1 x Nut (H4) (H2) (H2) (P7) (H15) Allen Key 1 x Wrench (H4) (H19) ( H15) (H2) (H19) (P7) (P7) (H4) (H19 ) Secure Back Supports (P7x2) together as shown with 1 x Nut (H4) and 1 x Screw (H2) by tightening with the Allen Key (H15) and Wrench (H19).
Page 7
Step 5 (H13) You will need (P11) (H9) (H13) (H5) 4 x Cam Nuts 4 x Dowels (H5) (H7) (H5) (H9) (H7) (H13) (H13) 2 x CL Runner 8 x Screws (H9) (H13) (H13) Tracks (H9) (H7) (H5) (H5) (H13) Phillps head Screwdriver (P11)
Page 8
Step 7 (H6) You will need (H6) Phillps head 8 x Cam Bolts Screwdriver (H6) (P9) (H6) (H6) (H6) (H6) (P10) (H6) (H6) (H6) Attach 8 x Cam Bolts (H6) to Drawer Top Panel (P9) and Base Panel (P10) as shown by tightening with the Phillips Head Screwdriver.
Page 9
Step 9 (P4) (H9) (P6) Allen Key (P11) 6 x Screws (H15) (H3) (H3) (H15) (P11) (P4) (P9) (H3) (H3) (P10) (H3) (P12) (H3) (H3) (P6) (H3) (P4) Gently place the partially assembled drawer unit into the (H3) shelving frame as shown. Secure the Base Panel (P10) to Lower Left &...
Page 10
Step 11 You will need (H6) (H6) Phillps head 10 x Cam Bolts (P14) Screwdriver (H6) (H6) (H6) (P14) (H6) (H6) Secure 5 x Cam Bolts (H6) to Drawer Front (P14) by tightening with the Phillips Head Screwdriver. Repeat steps for the second Drawer. Step 12 You will need (P17)
Page 11
Step 13 (P15) (P18) (P19) (P16) (P17) Raw Side Slide Drawer Base (P18) into the grooves of Left & Right Drawer Sides (P15&P16) and Back Panel (P17). Repeat steps for the second Drawer. Step 14 (P14) You will need (H5) Phillps head 10 x Cam Nuts 10 x Cam Nuts...
Page 12
Step 15 You will need (H13) (H10) (H13) (P15) 2 x DL Runners 2 x DR Runners (H13) (H10) (H12) (H10) (H13) (H13) (P15) (H13) 12 x Screws Phillips head (H13) screwdriver (H13) (H12) (P16) Secure 1 x DL Runner (H10) to Drawer Left Side Panel (P15) and 1 x DR Runner (H12) to Drawer Right Side Panel (P16) as shown with 6 x Screws (H13) by tightening with the Phillips Head Screwdriver.
Step 17 You will need (H18) 1 x Washer (H13) (H16) (H16) (H18) Screws and wall plugs are not provided please use appropriate fixtures for your wall. We strongly suggest using the wall strap to prevent this unit from toppling. Seek advice from a qualified trades person on how to attach this to your specific wall.