Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Como Robe 2 Door
Summary of Contents for fantastic furniture Como Robe 2 Door
- Page 1 APPROVED LP 02/03/21 Version 1.0 Como Robe 2 Door fantasticfurniture.com.au...
- Page 2 We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
-
Page 3: Assembly Checklist
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly. -
Page 4: What You Need
Top Panel What you need (P1) to assemble the product Back Panel Back Right Side (P20) Panel Panel (P9) (P3) Long Connect Right DO NOT USE Stick (P10) Door Left (P13) Other tools you need: Door Phillips head screwdriver; Rail (P12) Hammer Left Side... - Page 5 Step 1 You will need (P3) 12 x Small 2 x CL Runner Screws (H5) Tracks (H6) 2 x CR Runner Phillips Head Tracks (H7) Screwdriver (P2) Attach 2 x CL Runner Tracks (H6) to Left Side Panel (P2) and 2 x CR Runner Tracks (H7) to Right Side Panel (P3) with 12 x Small Screws (H5).
- Page 6 Step 3 You will need 7 x Cam Bolts Phillips Head (H3) Screwdriver (P3) Attach 7 x Cam Bolts (H3) to Right Side Panel (P3) as shown. Step 4 This is how a cam nut works..The head of the cam You will need bolt goes into the open mouth of the...
- Page 7 Step 6 (P6) You will need (P6) 2 x Cam Nuts Phillips Head (H4) Screwdriver (P2) Insert 2 x Cam Nuts (H4) into the holes of 2 x Rails (P6). Insert 2 x Cam Nuts (H4) into the holes of 2 x Rails (P6). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 8 Step 8 (P1) You will need 4 x Small Phillips Head Cam Bolts (H3) Screwdriver (P4) (P8) (P2) Attach 4 x Small Cam Bolts (H10) into Drawer Front (P8). Tighten with a Phillips Head Screwdriver. Step 9 (P3) You will need 12 x Dowels 7 x Cam Nuts (H1)
- Page 9 Step 10 20mm You will need (P10) (P2) (P9) 28 x Small 6 x Plastic Screws (H5) Glides(H21) (P20) (P11) Phillips Head Hammer Screwdriver Two People (P3) Required Join Back Panels (P9,P20) with Long Connect Stick (P10) and Short Connect Stick (P11), then put into the groove on the back of the carcase, colour faces inside, attach it with 28 x Small Screws (H5).
- Page 10 Step 12 You will need 2 x Clothes 1 x Clothes Hanger Support Hanger (H15) (H14) (P3) 4 x Timber Phillips Head Screws (H17) Screwdriver (P2) Two People Required Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P9) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P10) with 4 x Small Screws (H5).
- Page 11 Step 14 You will need 1 x Dowel 5 x Small Cam (H1) Bolts (H10) (P14) Phillips Head Screwdriver Insert 1 x Dowel (H1) into Drawer Front (P14). Attach 5 x Small Cam Bolts (H10) as shown. Step 15 (P15) (P19) You will need 5 x Small Cam...
- Page 12 Step 17 You will need (P15) (P18) (P17) 6 x Long Phillips Head Screws (H2) Screwdriver (P16) (P14) Attach Drawer Back (P18) to Drawer Sides (P15,P16) with 4 x Long Screws (H2), then attach Drawer Back (P18) to Support Rail (P19) with 2 x Long Screws (H2). Make sure that the groove lines up the whole way around the drawer.
- Page 13 Step 20 Insert the assembled drawers into the corresponding compartments as shown. Ensure the drawers slide easily along the rails. Please make sure your chest is sitting squarely on the floor,then tighten all the screws and bolts – being careful not to over tighten fantasticfurniture.com.au Page 13...
-
Page 14: Job Complete
Step 21 We strongly advise that you use the wall safety strap provided to You will need prevent the unit toppling 1 x Safety 1 x Screw Strap (H18) (H19) 20mm 1 x Washer Phillips Head (H20) Screwdriver Use Screw (H19) and Washer (H20) to connect Safety Strap (H18) on Top Panel (P1). - Page 15 Step 23 You will need OPTIONAL STEP TO LEVEL WARDROBE ON UNEVEN FLOOR 1 x Wedge (H22) SNAP Insert the wedge (H22) under the wardrobe at the point where the floor is lowest. Push in until wardrobe is level, then snap off the excess wedge sections. fantasticfurniture.com.au Page 15...
- Page 16 HOW TO ADJUST THE HINGES TO ALIGN THE DOORS IF NEEDED. STEP 1 Open the door. Top panel Door STEP 2 STEP 2a MOVE DOOR IN STEP 2b MOVE DOOR OUT Adjust the door move in or out a little projective line of projective line of top panel...