Advertisement
STEP 1
You will need:
2 x T Z Fitting (H1)
P1
P1
1
Insert TZ fittings in to P1 and tap in with mallet.
2
Align dowels on P2 with holes on P5 and bring together.
3
Align dowels on P6 with holes on P5 and bring together.
4
Align dowels on P1 with holes on P5 and bring together.
P5
P2
All raw edges should be
this stage of assembling
Page 4
Note:
facing up and Oak
edges facing down in
P6
Towards top edge
TZ Fitting (H1)
Knock into Parts 1
Advertisement
