Summary of Contents for fantastic furniture Sonoma Clothes Rack Large
Page 1
Version 1.0 Sonoma Clothes Rack Large fantasticfurniture.com.au...
Page 2
Lo ve it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasti cfurni ture Warning: Ensure the wall strap is attached to avoid serious injury.
Assembly Checklist Read through the instructions Make sure you have all the required tools. Never use power tools unless instructed. carefully before you begin. Unless instructed, do not fully tighten Identify and lay out all of the components before you begin assembly. screw s until the item is fully assembled.
What You Need Top Middle Frame to assemble the product (P11) Top Right Frame Small Top Panel (P9) (P3) Large Top Panel (P1) Small Shelf Panel (P4) Other tools you need Hanging Rail Top Left Frame (P8) Small Shelf Panel (P5) Phillips Head Screwdriver (P4)
Page 5
(P5) Step 1 (P6) You will need (P5) (H5) (P5) (H3) (P6) (H3) 4 x Screws 6 x Adjustable (H3) Feet (H1) (H3) (P6) Allen Key (H5) (H1) (H3) (P9) (P9) (P10) (H3) (P10) (H1) (H1) (H1) Attach Top & Lower Left Frames (P5&P6) with 2 x Screws (H3) by tightening with the Allen Key (H5).
Page 6
Step 3 You will need (P6) (P2) (H3) (P5) 12 x Screws Allen Key (H3) (H5) (H5) (P1) (H3) (H3) (H3) (H3) (H3) (P6) (P2) (H3) (P11) (H3) (H3) (H3) (H3) (P2) (H3) (P12) (H3) Attach Top & Lower Left Frames (P5&P6) and Top & Lower Middle Frames (P11&P12) to Large Top Panel (P1) and Large Shelf Panels (P2x2) with 12 x Screws (H3) as shown by tightening with the Allen Key (H5).
Page 7
Step 5 You will need (P7) 2 x Screws 2 x Nuts (H4) (H2) (H2) (P7) Allen Key (H5) 1 x Wrench (H5) (H9) (H4) (H2) (H9) (P7) (P7) (H4) (H9) Secure Back Supports (P7x2) together as shown with 1 x Nut (H4) and 1 x Screw (H2) by tightening with the Allen Key (H5) and Wrench (H9).
Page 8
Step 7 You will need 24 x Screws (H5) (H3) Attach Small Top Panel (P3) and Small Shelf Panels (P4x5) to Top & Lower Middle Frames (P11&P12) and Top & Lower Right Frames (P9&P10) with 24 x Screws (H3) as shown by tightening with the Allen Key (H5).
Step 9 You will need (H8) (H6 ) (H6 ) 2 x Washers (H6 ) (H8) Screws and wall plugs are not provided please use appropriate fixtures for your wall. We strongly suggest using the wall strap to prevent this unit from toppling. Seek advice from a qualified trades person on how to attach this to your specific wall.
Page 10
Version 1.0 Sonoma Utility 3 Shelf fantasticfurniture.com.au...
Page 11
Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasti cfurni ture Warning: Ensure the wall strap is attached to avoid serious injury.
Page 12
Assembly Checklist Read through the instructions Make sure you have all the required tools. Never use power tools unless instructed. carefully before you begin. Unless instructed, do not fully tighten Identify and lay out all of the components before you begin assembly. screw s until the item is fully assembled.
Page 13
What You Need Right Side Frame to assemble the product (P4) Top Panel (P1) Other tools you need Left Side Frame Phillips Head screwdriver (P3) Shelf Panels (P2) Back Support (P5) Back Support Shelf Panels (P5) (P2) Box 1: Top Panel (P1) 2 x Shelf Panels (P2) Left Side Frame(P3) Right Side Frame (P4)
Page 14
Step 1 You will need (P4) 4 x Adjustable Feet (H1) (P3) Secure 4 x Adjustable Feet (H1) to the bottom of Left & Right Side Frames (P3&P4) as shown. Step 2 Ensure the top panel is rotated You will need so the pre-drilled hole is facing underneath the unit.
Page 15
Step 3 You will need (P5) 1 x Screw 1 x Nut (H4) (H2) (H2) (P5) Allen Key 1 x Wrench (H5) (H9) (H5) (H4) (H2) (P5) (P5) (H4) (H9) Secure Back Supports (P5×2) together as shown with 1 x Nut (H4) and 1 x Screw (H2) by tightening with the Allen Key (H5) and Wrench (H9).
Page 16
Step 5 You will need 1 x Wall Strap 1 x Wall Strap (H6) Screw (H7) (P1) (H6) (H8) 1 x Washer Phillips head (H8) screwdriver (H7) Attach the Wall Strap (H6) to Top Panel (P1) with 1 x Washer (H8) and 1 x Wall Strap Screw (H7) by tightening with the Phillips Head Screwdriver.
Page 17
Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. Page 8...
Page 18
Version 1.0 Sonoma Clothes Rack 2 Drawer fantasticfurniture.com.au...
Page 19
Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasti cfurni ture Warning: Ensure the wall strap is attached to avoid serious injury.
Page 20
Assembly Checklist Read through the instructions Make sure you have all the required tools. Never use power tools unless instructed. carefully before you begin. Unless instructed, do not fully tighten Identify and lay out all of the components before you begin assembly. screw s until the item is fully assembled.
Page 21
What You Need to assemble the product Top Panel Top Right Frame (P1) (P5) Hanging Rail (P8) Top Left Frame Other tools you need (P3) Phillips Head screwdriver;Hammer Back Support (P7) DrawerTop Panel (P9) Right Side Panel Box 1: (P12) Top Panel (P1) (P16) Back Panel...
Page 22
(P3) Step 1 You will need (P4) (P3) (H15) (P3) (P4) 4 x Screws 4 x Adustable (H3) Feet (H1) (P4) (P5) Allen Key (H1) (H15) (P5) (P5) (P6) (P6) (H3) (H1) (P6) (H1) (H15) Attach Top & Lower Left Frames (P3&P4) with 2 x Screws (H3) by (H1) tightening with the Allen Key (H15).
Page 23
Step 3 You will need (P7) 1 x Screw 1 x Nut (H4) (H2) (H2) (P7) (H15) Allen Key 1 x Wrench (H4) (H19) ( H15) (H2) (H19) (P7) (P7) (H4) (H19 ) Secure Back Supports (P7x2) together as shown with 1 x Nut (H4) and 1 x Screw (H2) by tightening with the Allen Key (H15) and Wrench (H19).
Page 24
Step 5 (H13) You will need (P11) (H9) (H13) (H5) 4 x Cam Nuts 4 x Dowels (H5) (H7) (H5) (H9) (H7) (H13) (H13) 2 x CL Runner 8 x Screws (H9) (H13) (H13) Tracks (H9) (H7) (H5) (H5) (H13) Phillps head Screwdriver (P11)
Page 25
Step 7 (H6) You will need (H6) Phillps head 8 x Cam Bolts Screwdriver (H6) (P9) (H6) (H6) (H6) (H6) (P10) (H6) (H6) (H6) Attach 8 x Cam Bolts (H6) to Drawer Top Panel (P9) and Base Panel (P10) as shown by tightening with the Phillips Head Screwdriver.
Page 26
Step 9 (P4) (H9) (P6) Allen Key (P11) 6 x Screws (H15) (H3) (H3) (H15) (P11) (P4) (P9) (H3) (H3) (P10) (H3) (P12) (H3) (H3) (P6) (H3) (P4) Gently place the partially assembled drawer unit into the (H3) shelving frame as shown. Secure the Base Panel (P10) to Lower Left &...
Page 27
Step 11 You will need (H6) (H6) Phillps head 10 x Cam Bolts (P14) Screwdriver (H6) (H6) (H6) (P14) (H6) (H6) Secure 5 x Cam Bolts (H6) to Drawer Front (P14) by tightening with the Phillips Head Screwdriver. Repeat steps for the second Drawer. Step 12 You will need (P17)
Page 28
Step 13 (P15) (P18) (P19) (P16) (P17) Raw Side Slide Drawer Base (P18) into the grooves of Left & Right Drawer Sides (P15&P16) and Back Panel (P17). Repeat steps for the second Drawer. Step 14 (P14) You will need (H5) Phillps head 10 x Cam Nuts 10 x Cam Nuts...
Page 29
Step 15 You will need (H13) (H10) (H13) (P15) 2 x DL Runners 2 x DR Runners (H13) (H10) (H12) (H10) (H13) (H13) (P15) (H13) 12 x Screws Phillips head (H13) screwdriver (H13) (H12) (P16) Secure 1 x DL Runner (H10) to Drawer Left Side Panel (P15) and 1 x DR Runner (H12) to Drawer Right Side Panel (P16) as shown with 6 x Screws (H13) by tightening with the Phillips Head Screwdriver.
Page 30
Step 17 You will need (H18) 1 x Washer (H13) (H16) (H16) (H18) Screws and wall plugs are not provided please use appropriate fixtures for your wall. We strongly suggest using the wall strap to prevent this unit from toppling. Seek advice from a qualified trades person on how to attach this to your specific wall.