Mount The 2150T Pump - Graco SaniForce 2150 Operation

Electric-operated diaphragm pump
Hide thumbs Also See for SaniForce 2150:
Table of Contents

Advertisement

Installation
Mount the
the 2150T
2150T Pump
Mount
Mount
the
2150T
To avoid serious injury or death from toxic fluid or
fumes:
• Never move or lift a pump under pressure. If
dropped, the fluid section may rupture. Always
follow the
Pressure Relief Procedure, page
before moving or lifting the pump.
• Do not expose pump or the plastic components
to direct sunlight for prolonged periods.
Prolonged exposure to UV radiation will degrade
natural polypropylene components of the pumps.
NOTICE
NOTICE
NOTICE
The pump is heavy. To prevent damage from
dropping, always use a lift to move the pump. Do
not use the manifolds to lift the pump. Use at least
two straps.
1. All pump models must be securely mounted
to the floor. Prior to securing, make sure the
mounting surface is flat and that the pump
doesn't wobble.
2. Secure the pump with screws through the
mounting feet and through the mounting bracket
or compressor box on the gear box. See
Dimensions (2150T Pump), page
NOTICE
NOTICE
NOTICE
To prevent pump damage, use all eight
fasteners.
3. For ease of operation and service, mount the
pump so fluid inlet and fluid outlet ports are easily
accessible.
12
All manuals and user guides at all-guides.com
Pump
Pump
21,
36.
Mounting a a a pump
pump without
without a a a Gearmotor
Mounting
Mounting
pump
without
A pump without a Graco gearbox and motor will
require a mounting platform to provide support
for the customer-supplied motor and gearbox
and provide alignment with the pump alignment
housing (116) and drive shaft (112) without putting
strain on the mounting platform or pump. See
Dimensions (2150T Pump), page 36
in fabricating a mounting platform.
REF
REF
REF
DESCRIPTION
DESCRIPTION
DESCRIPTION
A
Gearbox coupler bore and
keyway
B
Flange pilot diameter
Bolt circle diameter
C
D
Mounting hole thread size
To specify a non-Graco gearbox, refer to the figure
and table above.
Gearmotor
Gearmotor
for assistance
DIMENSION
DIMENSION
DIMENSION
35 mm/10
mm keyway
110 mm
130 mm
M8 x 1.25
3A5132K

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saniforce 3000Saniforce 4000

Table of Contents