Technical Specifications - Vitek VT-2637 Manual Instruction

Pour out the fat from the fat container (13),
–
wash the container (13) with warm water and
neutral detergent and then wipe it dry.
Do not use abrasives, solvents or metal
–
sponges for cleaning the frying plates (6, 7
or 21) and the grill body (14), as they can
damage the non-stick coating or the outer
surface of the grill body.
Never immerse the grill, power cord and cord
–
plug into water!
ATTENTION! To avoid electric shock, do not
immerse the unit into water or any other liquids.
STORAGE
•
Before taking the grill away for storage, clean
the frying plates (6, 7 or 21) and the grill
body (14).
•
Set the support legs (12) to the initial posi-
tion (see the chapter «Food cooking with the
grill»).
•
For easy vertical storing fix the frying
plates (6, 7). To do this lower the upper part
of the grill on the lower part, move the stop-
per (10) until clinging to the support (11).
•
Keep the unit in a dry cool place out of reach
of children and disabled persons.
DELIVERY SET
Press grill – 1 pc.
Fat container – 1 pc.
Additional frying plates – 2 pcs.
Manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 1650-2000 W
IM VT-2637.indd 7
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
7
ENGLISH
24.08.2018 12:45:12