Safety Measures - Vitek VT-2637 Manual Instruction

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
PRESS GRILL VT-2637
The press grill is used for cooking meat, fish or
vegetables.
DESCRIPTION
Power switch «
1.
On/off/lower plate temperature setting knob
2.
On/off/upper plate temperature setting knob
3.
Temperature/timer operation setting panel
4.
Lower plate lock button
5.
Lower frying plate
6.
Upper frying plate
7.
Handle
8.
Upper plate lock button
9.
Stopper between the frying plates
10.
Stopper (10) support
11.
Front support legs
12.
Fat container
13.
Body
14.
Lower frying plate heating indicator
15.
Timer setting buttons «+/-»
16.
Upper frying plate heating indicator
17.
Upper frying plate temperature digital
18.
symbols
Timer digital symbols
19.
Lower frying plate temperature digital
20.
indication
Additional frying plates
21.
Attention!
For additional protection against possible elec-
tric shock it is reasonable to install a residual cur-
rent device (RCD) with nominal operation current
not exceeding 30 mA. To install RCD, contact a
specialist.

SAFETY MEASURES

Read this instruction manual carefully before
using the unit and keep it for the whole operation
period. Use the grill for its intended purpose only,
as specified in this manual. Mishandling the grill
can lead to its breakage and cause harm to the
user or damage to his/her property.
Before plugging the unit in make sure that the
operating voltage of the grill corresponds to
the voltage of your mains.
The power cord is equipped with a "euro
plug"; plug it into the socket with reliable
grounding contact.
To avoid fire, do not use adapters for connect-
ing the unit to the mains.
Do not use the grill outdoors.
Never leave the operating grill unattended.
IM VT-2637.indd 3
»
Place the unit on a flat, stable heat-resistant
surface away from sources of moisture, heat
and open flame and with free access to the
mains socket.
Do not place and do not use the grill near
highly inflammable materials or liquids and
objects subject to thermal deformation.
Use the unit in places with proper ventilation.
To avoid fire, do not place the unit near cur-
tains and do not cover it during operation.
Be careful: the grill body heats up strongly dur-
ing the operation, do not touch hot surfaces to
avoid burns.
Beware of steam emission from gaps between
the frying plates. Be careful, keep your hands
and other open parts of your body away from
the frying plates.
Do not use the unit for cooking frozen food;
defrost frozen food before cooking.
ATTENTION! Take the products out of the unit
right after cooking; keeping products in the oper-
ating grill for a long time can cause their ignition.
Never use sharp metal objects to take the pre-
pared food out, as they can damage the non-
stick coating of the frying plates. Always use
kitchen tools suitable for non-stick coatings.
Do not move the grill when it is hot; wait until it
cools down completely.
Unplug the grill before cleaning or when you
are not using it.
Do not let the power cord hang from the table
or come in contact with hot surfaces or sharp
edges of kitchen furniture.
Never pull the power cord when disconnect-
ing the unit from the mains, take the power
cord plug and remove it carefully from the
socket.
Do not touch the grill body and the power plug
with wet hands.
Do not use the unit near the kitchen sink, do
not expose it to moisture.
To avoid electric shock, do not immerse the
power cord, the power plug or the grill itself
into water or any other liquids. If this has hap-
pened, DO NOT TOUCH the grill, unplug it
immediately and only then take the grill out
of the water. Apply to any authorized ser-
vice center at the contact address list given
in the warranty certificate and on the website
www.vitek.ru.
Do not allow children to touch the grill body
and the power cord during the grill operation.
This unit is not intended for usage by children.
3
ENGLISH
24.08.2018 12:45:11

Advertisement

Table of Contents
loading

Table of Contents