https://arttel.ru/
Tamper Alarm
Tamper alarm is anti-hack from Hardware level. When this option is checked, if the GDS3710 is removed
from the installation board, it will generate the alarm actions configured. There is an embedded mechanism
on the GDS3710 that allow it to sense when the it is removed.
Enable Tamper Alarm
Select alarm Action Profile
Keypad Input Error Alarm
Enable Keypad Input Error
Alarm
Select Alarm Profile
Alarm Schedule
This page specifies the configuration of Alarm Schedule.
Note: Schedule must be configured first to allow the alarm to take the related action.
https://arttel.ru/shop/ip-domofony/grandstream-gds3710
Table 22: Tamper Alarm
When activating this mode, GDS3710 will keep alarming until the alarm
is dismissed.
Select the type of alarms to be taken for the tamper alarm mode.
Table 23: Keypad Input Error Alarm
Enable/Disable the Input Error Alarm, GDS3710 will take alarm actions
every 5 incorrect attempts.
Select the Alarm action to be taken after 5 incorrect attempts.
Figure 50: Alarm Schedule
GDS3710 User Manual
P a g e
|
62