https://arttel.ru/
Motion Detection
Users can select a specific region to trigger the alarm using motion detection.
Enable Motion Detection
Region Config
Quit Config
Clear Selected Region
Sensitivity
Select Alarm Schedule
Select Alarm Action Profile
https://arttel.ru/shop/ip-domofony/grandstream-gds3710
Figure 48: Region Config
Table 19: Motion Detection
Click on the check box to enable Motion Detection.
Click to enter the Region Config menu.
Click to exit the Region Config menu.
Select a zone on the screen then click on Clear to delete the region.
Region sensitivity (value between 0-100%).
Select the Schedule programmed.
Select the programmed Alarm Action.
GDS3710 User Manual
P a g e
|
60