Connect To The Gds3710 Using Static Ip; Figure 14: Static Ip On Windows - Grandstream Networks GDS3710 User Manual

https://arttel.ru/

Connect to the GDS3710 using Static IP

If there is no DHCP server in the network, or the GDS3710 does not get IP from DHCP server, user can
connect the GDS3710 to a computer directly, using static IP to configure the GDS3710.
1. The default IP, if no DHCP server, or DHCP offer time out (after 3 minutes), is 192.168.1.168
2. Connect the RJ45 cable from GDS3710 to the computer network port directly.
3. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, except for 168) and configure
the "Subnet mask" to "255.255.255.0". Leave the "Default Gateway" to "Blank" like below:
4. Power on the GDS3710, using PoE injector or external DC power.
5. Enter 192.168.1.168 in the address bar of the browser, log in to the device with admin credentials.
The default user name and password are both set to admin.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and
show web interface of GDS3710.
7. Access the Web Configuration Interface. IE will indicate that "This website wants to install the
following add-on: GSViewerX.cab from Grandstream Networks Inc.", allow the installation.
8. Firefox, Chrome users need to download and install the following plug-in to see the video from the
GDS3710 webGUI.
Note: Please temporarily disable Antivirus or Internet Security Software and close all browsers when
download and install the Grandstream Plug-in Software.
https://arttel.ru/shop/ip-domofony/grandstream-gds3710

Figure 14: Static IP on Windows

GDS3710 User Manual
P a g e | 27