Cleveland SteamCraft 21CET8 Operation Installation Maintenance Manual page 15

6. Clean the interior of the compartment thoroughly.
Do NOT use abrasive cleaning compounds or steel wool.
•
7. Rinse the inside of the cooking compartments with clean water.
8. Clean the door gasket assemblies:
a. Remove the door gasket assembly (see Figure 5-1) by holding the gasket assembly at the sides
and lifting up and away from the door.
b. Wipe the gasket assembly with a damp cloth.
c. Wipe the inside of the door with a damp cloth.
d. Rotate the gasket assembly 180°. This makes the gasket last longer.
e. Replace the gasket assembly by sliding the retaining pins into the keyhole slots.
Keyhole Slots
9. Replace the cleaned slide racks.
10. Wipe the exterior with a damp cloth.
11. Leave cooking compartment door open until the next use to help prevent compartment odor buildup
and help increase gasket life.
Figure 5-1
Door Gasket Assembly
9
Retaining Pins