Table of Contents
Advertisement
CHANGING THE BRAKE PADS
1. Change the brake pad if the thickness of the friction surface is less than 1.5mm (0.06in).
1.
Drive the Access Platform on an even and firm ground.
2.
Use the outriggers to raise the wheels slightly off the ground, and turn off
the engine.
3.
Remove the wheels.
4.
Remove the brake hose at (1); close the hose with a plug.
5.
Remove nut (2).
6.
Screw an R1/4" x 75 bolt or 1/4" double nipple with internal M8 thread,
and bolt M8 x 60 at (1).
7.
Tighten bolt (3) so that the brake pads are separated off the brake disk.
8.
Turn spindle 4 inwards to separate the brake pad from the brake disk.
9.
Remove bolts (5) and move the brake cylinder aside.
10.
Remove bolts (6) and the brake pads.
Reinstall the brake calipers in the reverse order.
Kesla
SELF PROPELLED TELESCOPIC PLATFORM
54
XS
®
190
R1/4"
R1/4" x 75
M8 x 60
M8
Advertisement
Table of Contents
