Checking The Lifting Movement; Checking The Lifting Radius - Kesla XS 190 Operation & Maintenance Manual

Checking the lifting movement

1. Extend the jib to an angle of 45º with respect to the boom according to the markings
at the end of the jib and the boom, see item C.
2. Extend the jib all the way up, see fig. on page 19. Extend the boom extensions fully
with the telescope.
4. Lower the boom with the lifting cylinder keeping the control lever all the time in the
lowering position
5. After the lowering movement has stopped, check the stopping point from indicator
located in the turntable. The indicator should now point the scale in the decal of the boom,
see item B.
Note! If the indicator passes the max. line of the scale by more than 5 mm , the
Access Platform should not be used. Have the load control checked.

Checking the lifting radius

Kesla
SELF PROPELLED TELESCOPIC PLATFORM
19
XS
®
190