Kesla XS 190 Operation & Maintenance Manual page 34

Override buttons 1, 2, 3
When required, the boom may be lifted to an angle of approx. 20 degrees when the
outriggers are up. This function increases the ground clearance at the platform for instance
when driving the Access Platform on top of a trailer.
For this, press buttons 1 & 2 when raising the boom.
When the boom is raised, press button 2 when driving the Access Platform.
Both driving and steering are performed with the levers as usually.
When lowering the boom, press buttons 2 & 3.
Note! Be careful when driving with the raised boom. The Access Platform may tip over!
The maximum allowed lateral inclination with a raised boom is ± 7.5 degrees.
Speed selection switch 4
The switch 4 is for selecting either high speed "0" or low speed "1".
Differential lock 5
When driving in difficult conditions, the hydraulic differential lock may be engaged by
pressing button 5. To disengage the lock, release the button.
Steering mode selector 6
The steering mode is selected with switch 6.
1. four wheel steering
0. rear wheel steering
2. crab steering
Kesla
SELF PROPELLED TELESCOPIC PLATFORM
33
XS
®
190