Table of Contents
Advertisement
Kubota D905-E service programme
Kubota D905-E
Daily,
with the engine
switched off:
Daily,
with the engine
switched on
After the first 50h
of operation
50h intervals
100h intervals
200h intervals
400h intervals
500h intervals
800h intervals
12 month intervals Replace the air filter element. **
24 month intervals Replace the radiator hoses and hose clamps.
Kesla
SELF PROPELLED TELESCOPIC PLATFORM
Check oil; check for leakages, correct as required before use.
Check level and cleanliness of oil. Add oil when required.
Check coolant level. NOTE! DO NOT OPEN THE FILLING
OPENING OF THE COOLING WATER SYSTEM IF THE
ENGINE IS WARM. LET THE ENGINE COOL DOWN AT
LEAST 30 MINUTES AFTER USE BEFORE OPENING THE
FILLING PLUG OF THE COOLING SYSTEM. Add coolant
when required.
Check for loose bolts and nuts and tighten if needed.
Listen to the sound of the engine. Switch off the engine if the
engine rpm reduced or increases suddenly
does not run smoothly), of if there is unusual interference
sound.
Check the exhaust gas colour. Stop the engine if the exhaust
gas suddenly turns black.
Stop the engine if the oil pressure warning lamp or the coolant
temperature warning lamp is lit while the engine is running.
Change engine oil and oil filter.
Check fuel pipes and hoses, tightness of their connections, and
condition of hose clamps.
Clean the air filter element..
Check the battery electrolyte level.
Check the fan belt tightness and wear.
Change engine oil and oil filter.
Check the radiator system and the radiator cell, and check the
condition of the radiator.
Replace the fuel filter element.
Clean the radiator system and the radiator cell, and check the
condition of the radiator.
Replace the fan belt..
Adjust valve clearances.
Check the electrical wires for damage; check the condition of
the connectors.
Replace the fuel hoses and hose clamps.
Change the coolant.
** Once a year of every six cleanings.
XS
®
190
48
(the
engine
Advertisement
Table of Contents
