Kesla XS 190 Operation & Maintenance Manual page 19

Kesla XS
®
190
SELF PROPELLED TELESCOPIC PLATFORM
Check that the triangular fastening item on top on the boom is straight; visually check that
the chains are tight. Note! If the triangular link is askew, in others words if one of the
chains is shorter, check the condition, fastening and adjustment of the chains. The Access
Platform must not be used, if for instance one of the chains is broken or its fastening or
adjustment is loose.
Wrong
Right
Triangular fastening link of the boom
The telescope boom should stop when the middle painted mark is visible. The limiter of the
lifting radius of the telescope boom has now been checked.
Note! If the last section of the painted marking is further than 100 mm from the exit of the
boom, the Access Platform should not be used. Have the load control checked.
Direction C Point A Point D Point B
Checking marks of the extension boom and the boom lowering
18