Programmed Start Settings - ZANOLLI TEOREMA POLIS PW Manual For Installation, Use And Maintenance

4. FUNCTION

4.3.2. Programmed start settings

NOTE: YOU CAN SET UP TO TWO
PROGRAMMED STARTS A DAY AN
HOUR APART.
Note: Active mode "ON" is required in order
to set a programmed start.
Press and hold the "clock" key (Fig.1) for 5
seconds. The white (backlit) screen (Fig.2)
will appear. The parameter that can be
modified is the one with the "negative" icon.
Use the "data increase and decrease"
keys to activate (ON) or deactivate
(OFF) the programmed start.
If you select OFF and press the "clock" key
(Fig.1) for 5 seconds, the system will return
to the initial active "ON" mode.
If you select "ON" and press the "clock" key
(Fig.1) the programming will then shift to
the "HOURS" setting of the first start on
(the day) LUNEDI (MONDAY) (Fig. 3) with
the "negative" selected parameter.
NOTE: "OFF" will appear between the
23.00 (or 11 pm) and 01.00 (or 01 am)
values. By confirming this setting the
programmed start will not happen on the
chosen day.
Use the "data increase and decrease"
keys to set "HOURS". Once you reach the
desired value press the "clock" key (Fig.1)
to save.
Programming
"MINUTES" are set (Fig.4).
Use the "data increase and decrease"
keys to set "MINUTES". Once you reach
the desired value press the "clock" key
(Fig.6) to save.
22
K -
K- CAM
K-TIMER
K- SKY
K -
shifts when
K- STALL
K- CAM
K- UMID
K-TIMER
K- PROG
K- SKY
TEOREMA POLIS PW
1
2
Display LCD 64x128
3
Display LCD 64x128
the
4