ZANOLLI TEOREMA POLIS PW Manual For Installation, Use And Maintenance page 21

4. FUNCTION
- Renaming Programs
You can rename each program between
01 and 20.
Select the program number you want to
rename. Press and hold the "data
9
increase" or "data decrease" key until
a blinking cursor appears on the screen
(Fig.9). Select the letter by using the
"data increase" and "decrease" keys.
Press and hold the "P" key for 1 second
to save (Fig.10). Repeat until wording is
complete.
To exit (the process) press and hold the
"P" key for 10 seconds until (you hear)
the acoustic signal.
10
- Program no. 21 (AUTO-CLEANING)
Program no. 21 has the oven (cooking) chamber disinfection function.
This is a "fixed" 45-minute program during which the temperature is set at
400°C, overhead and bedplate power is set at level 9 and none of these
parameters can be modified.
TEOREMA POLIS PW 21