ZANOLLI TEOREMA POLIS PW Manual For Installation, Use And Maintenance page 23

Programming shifts to
NUMBER setting (Fig. 5). Use the "data
increase and decrease" keys to set
PROGRAM NUMBER. (Fig.5). Once
you reach the desired value press the
"clock" key (Fig.6) to save and shift to
parameter settings
programmed start of the day.
Repeat the steps described above to set
the second programmed
necessary.
You can set programmed starts for
every day of the week. After saving the
last parameter (Sunday) the system will
highlight the initial enabled or disabled
programmed start data again.
To exit and return to active mode "ON" press and hold the "clock" key for
5 seconds. (Fig.6).
NOTE: In turning the system into inactive mode "OFF" when programmed
start is enabled, the "clock" key led will be on (Fig.6) and the following
screen is displayed:
K -
PROGRAM
K- CAM
of the second
K-TIMER
K- SKY
start
K- STALL
K- UMID
K- PROG
TEOREMA POLIS PW
Display LCD 64x128
5
if
6
System in "OFF" mode
Clock: date and time blinking
First programmed start time not blinking
Second programmed start time not blinking
Programmed start day
Selected program name and number
4. FUNCTION
23