Sleep Timer - Teac CR-H220 Owner's Manual

24
Basic Operation
How to adjust TONE/BALANCE/DIMMER
1. Press the TONE/BAL button.
Each time the TONE/BAL button is pressed, the
mode is changed as follows:
BASS TREBLE
(normal display)
Bass control
This control is used for adjusting the level of the
low frequency sound range.
Treble control
This control is used for adjusting the level of the
high frequency sound range.
Balance control
This control is used for adjusting balance of the
volume level between the left and right
channels.
Dimmer control
This control can be used to dim the display
panel or to return it to normal.
2. Within 3 seconds, turn the VOLUME/SELECT
knob to change the setting.

Sleep Timer

The power can be switched off after a specified
amount of time.
Press the SLEEP button repeatedly until desired time
appears on the display.
SLEEP-90 (80, 70 ... 10)
The power will be switched off 90 (80, 70 ... 10)
minutes later.
(normal display)
The sleep timer is off.
< The display is dimmed when you set the sleep
timer.
< If you want to check the remaining time, press the
SLEEP button once. The remaining time will be
displayed for 3 seconds, and return to the normal
display.
ENGLISH
BALANCE DIMMER