ADIC Scalar Series Installation And Operating Manual page 27

Library Robotics
Library Robotics
p Attach one end of the SCSI interface cable(s) to the connector(s) shown on the rear of your Scalar Library .
Press firmly and secure the bail locks.
p Plug the other end of the SCSI interface cable(s) into the external connector(s) on the SCSI interface card(s).
Secure the bail locks firmly.
The bail locks at both ends of the SCSI cable must be securely fastened
in order for your library to communicate properly with the computer.
Drive 4 Drive 3
T
T C
J
C
SCSI Configuration 4 — Four SCSI Buses
Drive 4 Drive 3
C T
T C
C
T
SCSI Configuration 5 — Five SCSI Buses
Drive 2
C
C T
Drive 2
C T C
Note
Connecting the Scalar 448
Drive 1
T
Drive 1
T
17