Wenger StageTek Roll-A-Deck Assembly Instructions

Accessory

Table of Contents

Download this manual

For Replacement Parts and more detailed product information,

CAUTION

Make sure anyone assembling or

installing the StageTek component has

read and understands the instructions.

Visit the StageTek web page at wengercorp.com for detailed instructions and videos.

Note: Please read and understand these instructions before installing.

Note: If you need additional information, contact Wenger Corporation using the information below.

©Wenger Corporation 2021

Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Basic Instructions only!

refer to the StageTek Owner's Manual 280A099.

Always comply with Warnings

or Cautions in the instructions

or posted on the equipment.

Printed in USA 2021-09

Assembly Instructions

StageTek

CAUTION

Roll-A-Deck

Accessory

Part #280A553-02

Table of Contents

Need help?

Do you have a question about the StageTek Roll-A-Deck and is the answer not in the manual?

Page 1 Visit the StageTek web page at wengercorp.com for detailed instructions and videos. Note: Please read and understand these instructions before installing. Note: If you need additional information, contact Wenger Corporation using the information below. ©Wenger Corporation 2021 Printed in USA 2021-09 Part #280A553-02 Wenger Corporation, 555 Park Drive, P.O.
Page 2 Assembly Caster 1. Lay the StageTek deck upside down on a clean surface. 2. Attach the leg Assemblies. Tube a. Insert the leg tube all of the way into each of the pocket assemblies. b. Secure each leg tube by hand tightening the knob on every Pocket pocket assembly.