Wenger StageTek Chair Stop Assembly Instructions

For Replacement Parts and more detailed product information,
CAUTION
Make sure anyone assembling
or installing the StageTek
component has read and
understands the instructions.
A
TTACHING A
To attach a Permanent Chair Stop to the stage deck:
1. Align the Chair Stop to fit against the edge of the stage deck.
2. Attach the Chair Stop to the stage deck using #8-15 x 1-1/2" Truss Head Screws through
each of the predrilled holes in the Chair Stop and into the deck surface.
Visit the StageTek web page at www.wengercorp.com for detailed instructions and videos.
Note: Please read and understand the instructions before starting the assembly or installation.
Note: If you need additional information, contact Wenger Corporation using the information below.
©Wenger Corporation 2013
Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com
Basic Instructions only!
refer to the StageTek
Always comply with Warnings
or Cautions in the instructions
or posted on the equipment.
P C
ERMANENT HAIR
#8-15 x 1-1/2"
Truss Head Screws
Permanent
Chair Stop
StageTek
Owner's Manual 280A099.
™
CAUTION
S
TOP
Printed in USA 04/13
Assembly Instructions
Chair Stop
™
Part #281A516-03