Wenger Nota Assembly Instructions

Universal ganging clamp accessory

Download this manual

Contents

Important User Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2

Safety Precautions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2

Required Tools� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Visit the Nota Chairs web page at wengercorp.com for more information.

Note: Please read and understand these instructions before proceeding�

Note: If you need additional information, contact Wenger Corporation using the information below�

©Wenger Corporation 2024

Wenger Corporation, 555 Park Drive, P�O� Box 448, Owatonna, Minnesota 55060-0448

Questions? Call��USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp�com

for Nota

Universal Ganging Clamp shown on Musician Chairs

(from the back)

Printed in USA 2024-10

Assembly Instructions

Universal Ganging Clamp

, Student and Musician Chairs

Supplied Hardware � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Assembly � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Operation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4

Accessory

Part #190A189-02

Need help?

Do you have a question about the Nota and is the answer not in the manual?

Page 1 Visit the Nota Chairs web page at wengercorp.com for more information. Note: Please read and understand these instructions before proceeding� Note: If you need additional information, contact Wenger Corporation using the information below� ©Wenger Corporation 2024 Printed in USA 2024-10 Part #190A189-02 Wenger Corporation, 555 Park Drive, P�O�...
Page 2 Wenger Corporation� Wenger Corporation does not assume any responsibility for any errors that may appear in these instructions� In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of these instructions�...
Page 3 NOTICE There are four mounting holes in the bracket. The inner two holes are used for attaching the bracket to Nota Chairs. The outer two holes are used for attaching the brackets to Student and Musician Chairs. 4� Attach the ganging clamp receiver (3) to the user's right side leg of the chair in the same manner as step 2�...
Page 4 Operation 1� To gang chairs together, lift a chair so that the spline side bracket can be positioned and inserted through the receiver hole of the adjacent chair� 2. Configurations using the ganging brackets: ▪ Straight - position the chairs in a straight row� ▪...

StudentMusician