Table of Contents
Advertisement
Quick Links
Contents
Important User Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Safety Precautions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Required Tools� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Supplied Hardware � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Parts List � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Visit the STRATA Event Staging and Tent Floor System web page at wengercorp.com for more information.
Note: Please read and understand these instructions before proceeding�
Note: If you need additional information, contact Wenger Corporation using the information below�
©Wenger Corporation 2024
Wenger Corporation, 555 Park Drive, P�O� Box 448, Owatonna, Minnesota 55060-0448
Questions? Call�����USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp�com
STRATA
Assembly � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Plywood Deck Specification � � � � � � � � � � � � � � � � � � � � � � � � � 5
Assemble the Frame � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Attach the Frame to the Plywood Panel � � � � � � � � � � � � � � � � 7
Attach the Lockdown Assemblies � � � � � � � � � � � � � � � � � � � � � 11
Printed in USA 2024-11
Assembly Instructions
System Deck Kit
®
Part #183A302-02
Advertisement
Table of Contents
Related Manuals for Wenger STRATA
Summary of Contents for Wenger STRATA
-
Page 1: Table Of Contents
Attach the Lockdown Assemblies � � � � � � � � � � � � � � � � � � � � � 11 Visit the STRATA Event Staging and Tent Floor System web page at wengercorp.com for more information. -
Page 2: Important User Information
Wenger Corporation� Wenger Corporation does not assume any responsibility for any errors that may appear in these instructions� In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of these instructions�... -
Page 3: Safety Precautions
Safety Precautions Throughout this document you may find cautions and warnings which are defined as follows: • WARNING: Failure to follow the instruction could result in serious injury or damage to property� • CAUTION: Failure to follow the instruction could result in minor injury or damage to property� Read and understand all of these safety instructions before any assembly, installation or use�... -
Page 4: Supplied Hardware
Supplied Hardware 1-3/4" 1-3/4" 3/8-16 x 1-3/4" Capscrew 3/8-16 Locknut 1/4-20 x 1" Elevator Bolt 7/8" 6-32 x 7/8" 1/4-20 Flanged Locknut Socket Head Capscrew Parts List Item Description Item Description 3/8-16 x 1-3/4" Hex Head Capscrew Lockdown Assembly 3/8-16 Locknut, Deck Hook 1/4-20x1"... -
Page 5: Plywood Deck Specification
3� Inventory the hardware package and make sure that all required hardware is present� Plywood Deck Specification The STRATA System Deck Kits are shipped without the deck panels that are the end user's responsibility to furnish� STRATA System has been designed to meet certain loading requirements� The plywood is an important structural component and a minimum grade of plywood is necessary in order to meet the loading requirement�... -
Page 6: Assemble The Frame
Assembly (continued) Assemble the Frame A 4' x 8' deck (1219 mm x 2438 mm) is illustrated below but the assembly process is the same with other deck sizes� NOTICE Deck widths greater than 2' (610 mm) but not exceeding 3' (914 mm) will have one middle beam. Decks 2' (610 mm) or less will have no middle beam. - Page 7 Assembly (continued) Assemble the Frame (continued) 5� Assemble the middle and side deck beam and deck hook assemblies to the two deck hook caps as follows� a. Place a deck hook cap (8) on a flat surface with the open channel facing upward. b�...
-
Page 8: Attach The Frame To The Plywood Panel
Assembly (continued) Attach the Frame to the Plywood Panel 1� Place the assembled frame on a plywood panel (supplied by end user) as follows� a. With two people working together, place the plywood panel face down on a flat surface. b�... - Page 9 Assembly (continued) Attach the Frame to the Plywood Panel (continued) 2� Using the frame as a template, drill holes through the plywood panel as follows� NOTICE The plywood panel and assembled frame must rest on pedestals or an open frame so that drill bits can pass through the panel. a�...
- Page 10 Assembly (continued) Attach the Frame to the Plywood Panel (continued) 3� Attach elevator bolts (3) to the plywood panel as follows� a� With two people working together, lift the panel and frame upward and onto its edge or turn it over� b�...
-
Page 11: Attach The Lockdown Assemblies
Assembly (continued) Attach the Frame to the Plywood Panel (continued) 4. Place the plywood panel face down onto the flat surface 1/4-20 Flanged Locknut with the threads of the elevator bolts extending upward� a� Using a 7/16" nut driver and power tool or a 7/16"... - Page 12 Assembly (continued) Attach the Lockdown Assemblies (continued) 3� Attach the lockdown assemblies (6) to the deck hook caps (8) as follows� a� Place the left lockdown housing (the housing that has the threaded holes and pilot holes) into the deck hook cap (8) channel at an angle� b�...
Need help?
Do you have a question about the STRATA and is the answer not in the manual?
Questions and answers