Mercedes-Benz E-Class 2009 Owner's Manual page 73

Seats
70
To raise the backrest contour
:
To soften the backrest contour
;
To lower the backrest contour
=
To harden the backrest contour
?
i
When the door is unlocked, opened or the
key is in position 1 in the ignition lock, the
setting of the lumbar support is automati-
cally checked and, if necessary, the indi-
vidual setting is restored.
Multicontour seat*
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
To adjust the thigh cushion
:
To adjust the backrest contour in the lum-
;
bar region
To adjust the backrest contour in the
=
upper back region
To adjust the backrest side cushions
?
Make sure the key is in position 2 in the
X
ignition lock.
AIRSCARF* (Cabriolet)
The AIRSCARF neck-level heating function
blows warm air around the heads of car occu-
pants. The warm air flows out of the holes in
the head restraints.
G Risk of injury
Very hot air can flow out of the vents in the
head restraints when AIRSCARF is in opera-
tion. This can cause burns on unprotected
skin near the vents. Lower the heating output
in good time, when necessary.
The three red indicator lamps in the button
indicate the heating level you have selected.
Make sure that the key is in position 2 in
X
the ignition lock.
To activate: press button :.
X
Three red indicator lamps in the button light
up. The blower starts up after a preheating
phase of seven seconds.
Press button : repeatedly until the
X
desired heating level is set.
To switch off: press button : repeatedly
X
until all indicator lamps go out.
You can use the adjustable fins on the head
restraint to adjust the height of the current of
air blown out according to your height.
Make sure that there are no objects covering
the intake grille on the back of the driver's
seat backrest.
* optional