Mercedes-Benz E-Class 2009 Owner's Manual page 121

On-board computer
118
Selecting the permanent display func-
tion*
This function is only available for vehicles with
automatic transmission*.
i
Vehicles for the United Kingdom: this
function is not available.
The Permanent display: function allows
you to choose whether the multifunction dis-
play always shows the outside temperature
or the speed in mph.
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Inst. cluster submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Permanent display: function.
You will see the selected setting: outside
temperature or Dig. speedo [mph].
Press the a button to save the setting.
X
Time/date
This submenu is only available on vehicles
with Audio 20.
Your vehicle may be equipped with one of the
following audio systems:
A: Audio 20
B: Audio 50 APS*
C: COMAND APS*
You can see which audio system is fitted in
X
your vehicle by referring to the separate
operating instructions.
Depending on the audio system fitted, time
and date are received from GPS satellites and
therefore cannot be set using the on-board
computer. Refer to the following table.
Setting using the on-board com-
puter
Automatic GPS satellite recep-
tion
Set the time zone once; see the
separate operating instructions
In the Time/date submenu, you can set the
time and date.
Setting the time
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Time/date submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Time: function.
You will see the time currently set.
Press the a button to change it.
X
Press the = or ; button to select the
X
display to be changed: hours, minutes.
Press the : or 9 button to set the
X
selected display.
Press the a button to store the entry.
X
Setting the date
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Time/date submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Date: function.
You will see the date currently set.
Press the a button to change it.
X
A B C
X
X X
X X
* optional