System Does Not Boot Up With Emulex Lp10000 Card Enabled (6306640); Hdd Order Changes In Bios Settings After Installing Hba Card (6308569); Bios Date And Time And Optimal Defaults Must Be Reset After Certain System Events (6379898) - Sun Microsystems Fire X4100 Product Notes

System Does Not Boot up with Emulex LP10000
Card Enabled (6306640)
If an Emulex LP10000 card is plugged in to any slot on the system and its BIOS is
enabled, the system does not boot up.
Analysis
The Emulex LP10000 BIOS interferes with system boot up.
Workaround
To boot up the system, disable the Emulex LP10000 BIOS.
HDD Order Changes in BIOS Settings After
Installing HBA Card (6308569)
After installing a supported host bus adapter (HBA) card, you might not be able to
boot the system to operating system level because of changes in the drive order.
Workaround
After installing or removing any supported HBA card connected to an external
storage device, make sure the BIOS boot order is set correctly according to your
system configuration.
BIOS Date and Time and Optimal Defaults Must
be Reset After Certain System Events (6379898)
With the initial version 6464 of the firmware using BIOS 22, you must manually reset
the date and time and load the optimal default settings in the BIOS Configuration
Utility after some system events.
The requirement to reset these items manually will be removed in the first update to
the firmware.
22 Sun Fire X4100 and Sun Fire X4200 Servers Product Notes • November 2006