Deleting Log Files - GE DigitalFlow DF868 Programming Manual

Deleting Log Files

Procedure Options
Clearing Data
LOG
Use the submenu to clear log files from the Model DF868's
memory. Press the appropriate side of the
desired pane of the data display screen, and complete the following
steps:
1. To access the Clear Menu, press the
a. If you have activated the security feature (see Chapter 1,
Programming Site Data, page 1-57 for details), enter the
assigned password and press
[F3] LOG
2. Press = .
3. At the Name prompt, the option bar shows the names of all log
files currently stored in memory. Use the [←], [→] and
keys to select a site file for deletion. To leave the
[EXIT]
press the key.
[F1]
4. Press to abort the procedure or press
log file. If any log files remain in memory, the Name prompt
repeats.
When all of the stored log files have been cleared or the
been pressed at the Name prompt, the programming sequence
resumes at this point.
Do one of the following:
• [F1]-[F3]
Press to enter one of the submenus.
• [EXIT]
Press the key to return to the data measurement display.
March 2008
[SCREEN]
key to activate the
[CLR]
key.
[ENT]
.
[F1]-[F4]
LOG
submenu,
[F2]
to Clear the specified
[EXIT]
key has
5-3