GE DigitalFlow DF868 Programming Manual page 81

March 2008
Displaying Transducer
Signals (cont.)
2-12
Table 2-8: Numeric Key Functions
Key
1 Scroll down the transducer signal list
Scroll up the transducer signal list
2
4 Expand the graph vertically
5 Return expanded graph to previous size
Compress graph horizontally
7
8 Return compressed graph to previous size
In summary, three basic functions are performed with the numeric
keys:
•
Signal Selection: use the "1" and "2" keys to select a transducer
signal for display by scrolling through the list of available signals.
•
Vertical Scaling: The "4" and "5" keys are used to scale the graph
vertically. Each press of the "4" key doubles the height of the
graph, while each press of the "5" key halves the height of the
graph. The three available scale factors are 1x, 2x and 4x.
•
Horizontal Scaling: The "7" and "8" keys are used to scale the
graph horizontally. Each press of the "7" key doubles the T INC
value (2x horizontal compression), while each press of the "8" key
halves the T INC value (2x horizontal expansion). The four available
compression ratios are 1x, 2x, 4x and 8x.
To return to the standard data screen, either select
[EXIT]
option bar or press the
Function
EXIT
key on the keypad.
from the
Displaying Data