GE DigitalFlow DF868 Programming Manual page 54

Procedure Options
Programming Site Data
After completing the above steps, the meter returns to the User
Program. Continue as follows:
•
To continue programming the meter, refer to the menu maps in
Appendix A and navigate to the desired menu. Then, proceed to
the appropriate section of this manual for instructions.
•
To leave the User Program and retain the previous settings, press
[EXIT] [F1] = NO at the SAVE
and then press
programming changes will be discarded and you will be returned
to the data display.
•
To leave the User Program and return to measurement mode, press
[EXIT] [F2] = YES
and then press
programming changes will be entered into the meter's memory,
and you will be returned to the data display
prompt. Any
the SAVE
at prompt. Your
.
March 2008
1-45