General Functions - Energetics Power Run 12.0 HRC Owner's Manual

Quick Key Definition
Level
4
8
10
12
14
16
Caution
TFT-LCD screen can be damaged easily; please protect it against the following conditions:
Hitting by hard or sharp object.
Dropping liquid on console.
Heat sources.
Enormous shocking.

General Functions

To start any workout phase after the setup, the user has to press the Start key.
If the user presses the Stop key during the workout phase, the workout pauses.
If the user presses the Stop key twice, the workout terminates and the system will return to the initial
state.
The Quick keys, Incline adjusting keys, Speed adjusting keys, and Start key only work during the
workout period. These keys do not work during the setup stage.
The Direction keys only work during the setup stage. The user may use the direction keys to choose
their desired workout program, as well as adjusting value. These keys do not work during the workout
phase.
There are 2 functions for the touch keys on the handlebar on two sides:
Adjusting the speed level.
•
Stop the treadmill when the user touches the touch keys on both sides at the same time.
•
Hand pulse in front of the user will read the user's heart rate when both keypads are held properly.
Pull out the safe key will stop the treadmill immediately.
Speed
4 km
8 km
10 km
12 km
14 km
16 km
Level
2
4
6
8
10
12
4
Incline
2 %
4 %
6 %
8 %
10 %
12 %