Part Iii Appendix; Example Programs - THORLABS LabView DCU2 Series Programming Manual

62 DCx camera
3
Appendix
This chapter contains the following sections:

Example programs

List of return values
3.1
Example programs
LiveStream_8bit
LiveStream_32bit
LiveStream_32bit_Vision
SingleCapture_8bit
Trigger_8bit
62
63
The following example programs are installed with the uc480 LabVIEW interface. The NI
Vision module must be installed for some examples.
LiveStream_8bit starts live operation of the camera in 8-bit mode and displays the
captured images.
Various camera settings can be made.
LiveStream_32bit starts live operation of the camera in 32-bit mode and displays the
captured images.
Various camera settings can be made.
LiveStream_32bit_Vision starts live operation of the camera in 32-bit mode and displays
the recorded images using the Vision module.
Various camera settings can be made.
SingleCapture_8bit captures an image from the camera in 8-bit mode at the touch of a
button and displays this image.
Various camera settings can be made.
Trigger_8bit captures an image from the camera in 8-bit mode and displays this image.
In addition, the camera's trigger mode can be activated and various camera settings can
be made.
© 2010 Thorlabs