Sethardwaregain - THORLABS LabView DCU2 Series Programming Manual

2.42

SetHardwareGain

Description:
Parameters:
Camera Handle In/Out
Green
Red
Master
Blue
Mode
IS_GET_MASTER_GAIN (32768)
IS_GET_RED_GAIN (32769)
IS_GET_GREEN_GAIN (32770)
IS_GET_BLUE_GAIN (32771)
IS_GET_DEFAULT_MASTER (32772)
IS_GET_ DEFAULT_RED (32773)
IS_GET_ DEFAULT_GREEN (32774)
IS_GET_ DEFAULT_BLUE (32775)
IS_SET_GAIN (34816)
error in/out
VI:
Related functions
© 2010 Thorlabs
serves to control the amplifiers in the camera, which can be set to
SetHardwareGain
between 0% and 100% independently of one another. Depending on when the gain is
changed, this setting may only take effect when capturing the next image.
SetAutoParameter
Handle on camera
Amplification of the green channel
Amplification of the red channel
Amplifies all channels
Amplification of the blue channel
Contains the increment at which the image duration
can be changed
Returns master gain
Returns red gain
Returns green gain
Returns blue gain
Returns standard master gain
Returns standard red gain
Returns standard green gain
Returns standard blue gain
Sets gains
Error code
37
uc480 VIs 51