Setflashdelay - THORLABS LabView DCU2 Series Programming Manual

2.38

SetFlashDelay

Description:
Parameters:
VI:
Related functions
© 2010 Thorlabs
allows you to set a period by which flash activation is delayed. In
SetFlashDelay
addition, you can set the duration of the flash. This allows a global flash function to be
implemented with which all lines of a rolling shutter sensor are exposed.
If the value 0 is passed for
activate the flash with a delay and deactivate it at the end of an image, you can pass 0
for the flash duration (Duration).
Camera Handle In/Out
Mode
IS_GET_FLASH_DELAY
IS_GET_FLASH_DURATION
IS_SET_VALUE
Duration In
Delay In
Value
error in/out
48
SetFlashStrobe
GetGlobalFlashDelays
, the normal flash function is used. If you only want to
Delay
Handle on camera
Contains the increment at which the image
duration can be changed
Returns the delay currently set
Returns the flash duration currently set
Set times
Time by which the flash is delayed (in µs)
Time in which the flash is activated (in µs)
Returns the setting queried with
Error code
24
uc480 VIs 47
IS_GET