Loadparameters - THORLABS LabView DCU2 Series Programming Manual

2.22

LoadParameters

Description:
Parameters:
VI:
Related functions
© 2010 Thorlabs
loads the parameters of a camera from a uc480.ini file or from the
LoadParameters
EEPROM memory of the camera. Using the SaveParameters function, you can save
camera parameters in an .ini file or on the camera.
Camera Handle In/Out
Filename
error in/out
34
SaveParameters
Handle on camera
Pointer to file name. Either the absolute path or the
relative path can be specified. For the camera's internal
parameter sets, these would be
"\\cam\\set1"/"/cam/set1," or
"\\cam\\set2"/"/cam/set2."
Passing displays the "Open File" window.
ZERO
Error code
uc480 VIs 31