Sethotpixelcorrection - THORLABS LabView DCU2 Series Programming Manual

52 DCx camera
2.43

SetHotPixelCorrection

Description:
Parameters:
VI:
SetHotPixelCorrection
status to be queried.
Camera Handle In/Out
Mode
IS_BPC_DISABLE (0)
IS_BPC_ENABLE_SOFTWARE (2)
IS_GET_BPC_MODE
Value
error in/out
allows hot pixel correction to be switched on/off or the current
Handle on camera
Deactivates the correction
Activates the software correction based on the
hot pixel list stored in the EEPROM
Returns the current mode
(32768)
Contains the
IS_GET_BPC_MODE
Error code
current mode
:
0 = Disabled
1 = Enabled
when using
© 2010 Thorlabs