Safety Terms And Symbols - Teledyne T3PS16081P User Manual

Safety Terms and Symbols

The following terms may appear on the instrument:
DANGER: Direct injury or hazard may occur.
WARNING: Potential injury or hazard may occur.
CAUTION: Potential damage to instrument/property may occur.
The following symbols may appear on the instrument:
CAUTION WARNING
Risk of Risk of
injury or electric
shock or
damage.
Refer to burn
manual.
Operating Environment
emperature: 0 °C to 40 °C
T
Relative Humidity: ≤ 80% RH at ≤ 30 °C
Altitude: ≤ 2000 m at ≤ 30 °C
Use indoors only.
Pollution degree 2. Use in an operating environment where
normally only dry, non-conductive pollution occurs. Temporary
conductivity caused by condensation should be expected.
AC Power
Input Voltage & Frequency: 100/120/220/230 V ± 10%, 50/60 Hz
The fuse type: 100/120 V: T6.3A/250V
Mains Supply Connector: CAT II per IEC/EN 61010-1:2010,
instrument intended to be supplied from the building wiring at
utilization points (socket outlets and similar).
EAR99 technology subject to restrictions on copyrights page.
Earth Protective
Ground Conductor
Terminal Terminal
220/230 V : T3.15A/250V
Power
Frame or
Chassis (On/Off)
Terminal
Alternating
Current
User Manual III