Page 1
5002-89 Bar Stool IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
Page 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. Wood Screw Head Cap Bolt Spring Washer...
Page 3
Assembly Instructions 3/3 Head Cap Bolt (long) Spring Washer Flat Washer Wood Screw Head Cap Bolt (short) Spring Washer Flat Washer STEP 2 Attach Back Frame (D) to unit with Flat Washers, Spring Washers, Head Cap Bolts (short) and Head Cap Bolts (long), tightening bolts only halfway. (See Figures 3 and 4) Tighten all bolts used in Steps 1 and 2.
Page 4
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. finished furniture. Ammonia Absorption causes parts to warp chemically attacks the finish. and split and finishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.