Advertisement
Head Cap Bolt (short)
STEP 2
Attach Back Frame (D) to unit with Flat Washers, Spring Washers,
Head Cap Bolts (short) and Head Cap Bolts (long), tightening bolts only halfway.
(See Figures 3 and 4)
Tighten all bolts used in Steps 1 and 2.
Insert Wood Screws into pre-drilled holes in unit, then tighten.
Assembly Instructions 3/3
Wood Screw
Spring Washer
Flat Washer
Figure 3
Head Cap Bolt (long)
Spring Washer
Flat Washer
D
Figure 4
Advertisement
