Homestyles 5002-89 Assembly Instructions page 2

IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ Do not tighten all the bolts until each part is properly assembled.
Ÿ Keep Hex Wrench as the bolts may need to be tightened in the future.
Wood Screw
C
STEP 1
Place Seat (A) upside down on a soft cloth.
Attach Legs (B) and (C) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 1)
Attach Front Stretcher (G) to unit with Wood Screws.
(See Figure 2)
Attach Side Stretcher (E) to Leg (B) and
Side Stretcher (F) to Leg (C) with Wood Screws.
Assembly Instructions 2/3
F
G
A
Head Cap Bolt
Spring Washer
Flat Washer
B
Figure 1
Figure 2
E