Navigating The Web Configurator; Title Bar - ZyXEL Communications GS1900 Series User Manual

Table 7 Web Configurator: Password > Users/SNMP (continued)
L ABEL
Apply
Cancel
5.3 Na vig a ting the We b C o nfig ura to r
The following summarizes how to navigate the Web Configurator from the
guide uses the GS1900-24HP screens as an example. The screens may vary slightly for different models.
The Web Configurator's Main Screen
Fig ure 52
The Web Configurator's main screen is divided into these parts:
•

– Title Bar

A
• – Navigation Panel
B
• – Main Window
C
5.3.1 T itle Ba r
The title bar provides some useful links that always appear over the screens below, regardless of how
deep into the Web Configurator you navigate.
Title Bar
Fig ure 53
The icons provide the following functions.
Table 8 Title Bar: Web Configurator Icons
L ABEL
Refresh
Save
Status
Chapter 5 Web Configurator
DESC RIPT IO N
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
B
DESC RIPT IO N
Click to reload the page.
Re fre sh
Click this to apply your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Click this to display basic information about the Switch.
GS1900 Series User's Guide
Sa ve
A
Sa ve
47
link on the top navigation panel to
screen. This
G e tting Sta rt
C
link on the top navigation panel to