Monitor: System; Mo Nito R: Syste M; Overview; What You Can Do In This Chapter - ZyXEL Communications GS1900 Series User Manual

7.1 O ve rvie w
This section provides information for
settings.
7.1.1 Wha t Yo u C a n Do in this C ha pte r
• The screen
IP
• The
Info rm a tio n
7.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP address is
192.168.1.1. The subnet mask specifies the network number portion of an IP address. The factory default
subnet mask is 255.255.255.0.

7.2.1 IPv4

Use this screen to view the Switch's IPv4 information. Click
screen.
Monitor > System > IP > IPv4
Fig ure 66
The following table describes the labels in this screen.
Table 23 Monitor > System > IP > IPv4
L ABEL
DHCP State
IP Address
Syste m
(Section 7.2 on page 64) displays IPv4 and IPv6.
screen (Section 7.3 on page
DESC RIPT IO N
This field displays the state of Dynamic Host Configuration Protocol RFC 2131 and RFC 2132
(DHCP).
This field displays IP address of the Switch in the IP domain.
GS1900 Series User's Guide
C

Mo nito r: Syste m

in . Use the
Mo nito r Syste m
65) displays the system information.
Mo nito r
64
HA PTER
screens to view general Switch
> > > to open this
Syste m IP IPv4
7