Navigating The Web Configurator; Title Bar - ZyXEL Communications GS1900 Series User Manual

Table 7 Web Configurator: Password > Users/SNMP (continued)
LABEL
SNMP
Use this section to specify the SNMP community and access right values.
Community
Access Right
Apply
Cancel

5.3 Navigating the Web Configurator

The following summarizes how to navigate the Web Configurator from the Getting Started screen. This
guide uses the GS1900-10HP and GS1900-24HP screens as an example. The screens may vary slightly for
different models.
Figure 66 Web Configurator's Main Screen
The Web Configurator's main screen is divided into these parts:
• A – Title Bar
• B – Navigation Panel
• C – Main Window

5.3.1 Title Bar

The title bar provides some useful links that always appear over the screens below, regardless of how
deep into the Web Configurator you navigate.
Figure 67 Title Bar
Chapter 5 Web Configurator
DESCRIPTION
Enter a string identifying the community name that this entry should belong to. The allowed
string length is 1 to 20, and the allowed content is ASCII characters from 33 to 126.
Select the access mode for this entry. The possible values are Read-Only and Read-Write.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS1900 Series User's Guide
50