Conduit Box Information - Toshiba Q7 Installation And Operation Manual

Conduit Box Information

The conduit plate information provided below is for the VT130 Series Q7 ASDs listed in
49.
The Conduit Box (P/N ASD-Conduit-1) may be used when more room is required at the ASD conduit
connection point for the stand-alone devices. This option makes adding and removing conduit easier and
quicker.
Installation
1. Remove the conduit plate 55295.
2. Install the Conduit Box 53354 (see
3. Make the conduit and wiring connections.
4. Install the Conduit Box cover 53355.
Figure 19. Conduit Box (option).
Figure 20. Conduit Box.
56
Figure 20), using the 2 screws from the conduit plate.
Q7 ASD Installation and Operation Manual
Table 4 on page