Sc-2345 Carrier Considerations - National Instruments SCC Series Quick Start Manual

Table 2. SCC Modules: Icon, Label Color, and Measurement Type (Continued)
SCC Module
SCC-SG Refer to the SCC-SG Series Strain Gage Modules User
Guide.
SCC-TC0X
SCC-FT01
SCC-DI01
SCC-DO01
SCC-RLY01
SCC-CO20
SCC-AO10

SC-2345 Carrier Considerations

© National Instruments Corporation
Icon
TC
IN OUT
3)
N.O.
COM
2)
N.C.
1)
0–20mA
ISO
3)
2)
+
±10V
–
1)
ISO
The SC-2345 carrier and the SC-2350 carrier each have different
functionality and SCC module configurations. The following sections
cover carrier-specific information relative to SCC module installation.
The following section provides information specific to the SC-2345 carrier.
Quick Reference Label
Affix the Quick Reference Label to the inside cover of the SC-2345.
This label, shown in Figure 12, shows the possible configurations of SCC
modules. The Quick Reference Label also lists the location of each signal
Label Color
15
Measurement Type
Blue Analog Input
Blue Analog Input
N/A Analog Input, Analog
Output, Digital,
GPCTR
Green Digital
Green Digital
Green Digital
Red Analog Output
Red Analog Output
SCC Quick Start Guide